11 Ways To Completely Redesign Your Double Glazing Lock Repairs

Double Glazing Lock Repairs

Good locks on your doors and windows will stop burglars from gaining entry into your home. They don't usually like to break glass or attempt to squeeze through windows.

Some double glazing owners, however, have experienced problems with their door or window lock after the installation. These issues can be solved without the need to replace double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window or door lock if it's damaged or is not working properly. They can fix hinges, striker plate and locks for double-glazing. double glazing repair near me can also adjust the cylinder's position to fix any misalignment issues that could be causing your handle to not operate correctly.

The mechanism could be seized if the key fits in the lock, but it will not turn or is difficult to insert. This can be caused by dirt or grime accumulating inside the mechanism. If this is the case, it might be possible to clean the lock and then lubricate. It is important to apply a dry lubricant such as teflon or graphite instead of oil which attracts dirt and adhere to the inside of the mechanism. After lubricating the lock, you must insert the key and try to turn it. The lubricant should make through the mechanism, and the lock should be able to rotate with ease.

A malfunctioning lock could be caused by loose screws inside the lock mechanism. They can become loose, fall out, or even break off completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws but caution must be taken not to tighten them too much, because this could cause damage to the internal components.

A broken lock can be dangerous for you and your family members, particularly if you have young children. They could easily open the door without your knowledge which gives them access to your home. If you're worried about this happening, then a vetted locksmith can provide a quick and efficient service to re-secure your double glazing doors.





Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific requirements, meaning that in many cases replacement windows and doors are not necessary.

Broken or Faulty Handles

Many double glazed windows feature a multi-point lock as a part of the overall security package. This is a great choice for those who are concerned about potential thieves who may try for ways to gain access to your home. Ask your locksmith about antilift blocks. They can be installed alongside your existing locks and can help keep your windows firmly shut.

Handle locks can be damaged or fail. They are the first part that a criminal will employ to open your window. The good news is that this is among the easiest parts to fix.

Modern handles made of aluminium and uPVC have a multi-point locking mechanism called Espagnolette which is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional feature on all new double-glazed windows.

It is crucial to fix the handle as soon as you can if it's damaged. A damaged handle can stop the window from closing properly and letting in a draft. It can also be a flaw that thieves who are opportunistic could take advantage of, putting your family's belongings and your personal belongings at risk.

To repair the damaged mechanism, you first need to access the window frame, then take off the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that matches the profile of the internal window frame mechanism.

Once the mechanism has been replaced the handle can be re-affixed using the original screws - however, we generally recommend replacing them with more long screws because this will ensure a more secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further deterioration. After this step is completed the window should be fully functional again at a fraction the cost of replacing it.

Hinges that are broken or Faulty

If your windows aren't shut correctly, draughts may get in, your home's security measures will be compromised and there's an increased risk of water damage or damp. Broken or damaged window hinges are a common problem that can be fixed easily.

If your windows made of uPVC won't open or close and close, it's likely the hinges require to be replaced or repaired. While most window manufacturers require you to purchase a new window unit in order to solve this issue We can replace the faulty hinges and save you money.

Window hinges are usually damaged by repeated use or weakened over time by corrosion. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This means not causing the window to close or open.

You can find the right parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all window hinges. It is recommended to consult a professional in this case to ensure that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be the main source of noise, and can also permit water to infiltrate your windows.

To resolve this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If it isn't, tap the headpin with a hammer in order to make a slight bend in the hinge barrel. This will keep the pin in its place. Ask a friend to hold the doors as you remove hinge screws and hinges. Replace the hinges with ones that are of the same size, and then attach the screws using glue. Finally put the hinges in place using clamps or weights while the glue dries.

After you have repaired your hinges, you are able to put the door back in place. You can also reattach the handle. It is recommended to replace the screws with the same length of wood dowels as the original screw so that they match up with each other.

Broken or Faulty Glass

While uPVC windows do an excellent job of keeping the cold out and warm in, they may become damaged over time. This can include broken or damaged glass, as well as faulty locks. This issue can be very expensive should it be not addressed. It also can detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as quickly as possible.

If the glass is broken but isn't shattered it is usually possible to repair it yourself with the proper tools and methods. Make sure the area around the broken glass is clear of debris, so that pieces of glass do not cause injuries or cause a trip hazard. Then, take any pieces of broken glass and dispose of them properly. Then, apply masking tape over the entire area to prevent shards from scattering and sticking to your skin when you move them. Making sure the glass pane is fitted prior to applying glue is recommended if you are dealing with a window that has two panes. This will ensure you have enough room to finish your project.

Before applying the glue clean the surface of the damaged frame and glass with a a dry, clean cloth. Follow the application and curing instructions that may differ from product to product. Depending on the direction of the crack, you may want to secure the glass while it is curing. You can do this using lightweight clamps that are designed to hold fragile materials.

Once the adhesive is fully set, carefully place the glass inside the window frame, making sure it's flush with the edge of the frame and there are no gaps between the glass and the window sash. Be careful not to bend the glass when you install it again, as this could weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that's completely shattered or has larger cracks, contact a professional glazier like O'Brien(r) to arrange an exchange. If you leave broken glass unattended, it could be a risk to children and pets It's therefore essential to act quickly.